02.2001
•
MPI/PROFIBUS DP (max. 12 MBaud)
•
VGA interface for external monitor
•
Ethernet connection 10/100 MBaud, RJ45
•
2 slots: 1 x PCI and 1 x shared PCI/ISA
•
Interfaces to the operator panel:
LVDS interface for SINUMERIK OP,
-
USB interface for SINUMERIK OP (internal)
-
•
USB interface (currently, only keyboard and mouse are supported)
•
Cardbus interface, 1 slot (type III)
Options
The following options are offered:
•
128 MB memory extension
•
External floppy disk drive (see Catalog NC 60·2000/2001)
•
PC standard keyboard MF-II (PS/2 interface)
•
19" CNC full keyboard (PS/2 interface)
3.2
MCI Board
The MCI Board is a 2/3 long PCI plug-in
board. As the Motion Control interface, it pro-
vides the required interfaces to the system
environment and the functionality not avail-
able in the hardware and software of the
PCU. These are:
•
PLC: SIMATIC S7 CPU 315-2DP
•
PROFIBUS-DP with Motion Control func-
tionality
•
MPI (Multiple Point Interface)
•
SRAM for retentive NC and PLC data
•
Internal logic (e.g. PROFIBUS clock gen-
eration, watchdog, etc.)
© Siemens AG 2001 All Rights Reserved
SINUMERIK 840Di System Overview (SYI) - 02.2001 Edition
3 Hardware
Fig. 3-2 MCI Board
-21
3