Sicam Ak 3 As Telecontrol Substation - Siemens SICAM RTU User Manual

Automation Units and Automation Networks
6.2.2

SICAM AK 3 as Telecontrol Substation

·
Serial communication with the control system via IEC 60870-5-101
·
The communication to the process takes place with local peripherals or serial communica-
tions protocols (e.g.: MODBUS, ...)
The local ethernet ports on CP-2016 or CP-2019 are not used in this application and thus
must be deactivated for security reasons.
The required parameter can be set on the BSE under
es
·
Mode of Ethernet ports
·
Own IP address
·
Subnet mask
In this configuration both local ethernet interfaces are deactivated.
Office Zone
Control Center Zone
Substation Zone
SICAM AK 3
SICAM AK
246
= 1 IP address (connected ports in switch mode)
= 0.0.0.0
= 0.0.0.0
IEC 60870-5-101
SICAM AK
PRE2
Process
Network settings
Control Center
IP-address:
Subnet mask: 255.255.0.0
CP-2016 or CP-2019
X0
X1
X2
X3
Netzwork settings| IP addresses
Own IP address
Subnet mask
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03
| IP address-
172.17.0.22
.......... 0.0.0.0
.................... 0.0.0.0