1.7.3.2
Installing Second Power Supply
The second power supply is only for redundancy and not for increasing the power. It is in-
stalled in the right slot. It needs to be pushed into the compartment • and fastened with
screws ‚. Then the wiring can be carried out. Please refer also to section 1.7.4, Wiring of the
Power Supply
PS-263x
SICAM AK
1.7.4
Wiring of the Power Supply
The supply can be carried out with single leads of the type H07V-K (2.5) or a cable of the type
H05VV-F3G (2.5).
rot
schwarz
Stromversorgung
(24 - 60 VDC)
SICAM RTUs, SICAM AK 3 User Manual
DC2-028-2.03, Edition 07.2016
2
PS-263x
Slot for
SICAM AK
nd
2 power supply
1
2
PS-2630
X1
+
-
PS-2632
braun
X1
blau
+
-
gelb/
grün
Stromversorgung
(110 - 220 VDC, 230 VAC)
Installation
/P
/N
73