Install Board Rack Cm-2844 - Siemens SICAM RTU User Manual

Installation
1.2.3

Install Board Rack CM-2844

The board rack CM-2844 is supplied as set with wall bracket and cable strain relief.
Proceed as follows:
·
remove the wall bracket from the board rack
·
Mark out the drill holes for the wall bracket on the rear panel of the cabinet according to
the enclosed drilling diagram (DC2-000-1)
DEVICE EDGE WITHOUT
WALL BRACKET
MINIMUM SPACE
·
Drill the holes according to the specifications on the drilling diagram
30
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03