Connect Engineering Pc With A Target System; Physical Connection; Directly Via The Usb Interface - Siemens SICAM RTU User Manual

Prepare Engineering
3.2

Connect Engineering PC with a Target System

For the transmission of engineering data to a system SICAM AK 3 the engineering PC must
be connected with the target system, and a SD card must be equipped on the master control
element.
3.2.1

Physical Connection

The following connection options are available:
·
Directly via the USB interface on the master control element
·
Remote operation, LAN/WAN via Ethernet (TCP/IP)
3.2.1.1

Directly via the USB Interface

SICAM TOOLBOX II PC and SICAM AK 3 are connected direct via the USB cable.
SICAM TOOLBOX II
TOOLBOX II
Re vision:
Lice nse Pa k:
Ve rsion 5 | Siem ens AG
CM-0825 USB connection cable
170
PS-2 63 x
USB interface (X4)
SICAM AK
Designation
CM-0825
SICAM AK 3
CP-2 01 6 DI- 211 0 DI- 211 0 CP-2 01 9 DO -2 21 0 AI -23 01 AI -23 00
Item-Number/MLFB
TC0-825
6MF13130AJ250AA0
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03