Removing Front Panel; Installation - Siemens SICAM RTU User Manual

1.3.1.2

Removing Front Panel

Proceed as follows:
·
Open the screws
·
Take hold of the front panel at the screws and remove it
1
PS- 263x CP-2016 DI-2110 DI-2110 CP-2019
SICAM AK
1
1.3.2

Installation

Caution
Before the installation of a module the peripheral cable (CM-2890) must already be fitted.
Warning
Left and right of the boards DI-2114, DI-2115 and DO-2211
an insulation plate must be installed.
One insulation plate is included to these boards. Further can
be ordered with following number:
Insulation plate, double euro format
Shielding plate holder.................... TC2-099
(4 pcs. per insulation)
There is no reinforced isolation between the peripheral circuits. Therefore, it is not allowed to protect each
circuit within one board separately using various fuses.
The installation of modules is carried by hand without any tools. Proceed as follows:
SICAM RTUs, SICAM AK 3 User Manual
DC2-028-2.03, Edition 07.2016
•
of the front panel which you want to remove.
DI-2110 DO-2210 AI- 2301 A I-2300 PS -263x
SICAM AK
CP -2016
T12-001
6MF13010CA010AA0
6MF13133CA000AA0
‚
.
PS-263x DI-2110 DI-2110 CP-2019 DI-2110 DO- 2210 A I-2301 A I-2300 PS -263x
2
SICAM AK SICAM AK
Installation
37