Table of Contents
Advertisement
Location
This appliance should be installed in a
dry, well-ventilated room. It should not
be installed where it is exposed to
direct sunlight or directly adjacent to a
heat-producing appliance such as an
oven or a radiator. The room
temperature should not go above or
below the climate range for which the
appliance is designed. The higher the
ambient temperature of the room, the
longer the compressor will run and the
more energy the appliance will
consume.
Please note the following when
installing the appliance:
– The mains connection socket must
not be located directly behind the
appliance and must be easily
accessible.
– The plug and mains connection
cable must not come into contact
with the rear of the appliance as they
may be damaged by vibrations from
the appliance.
– Nor should other appliances be
plugged into a socket located
directly behind the wine conditioning
unit.
Climate range
The appliance is designed for use
within a certain climate range (ambient
temperatures), and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.
Climate range
SN
N
ST
T
Ventilation
The wine conditioning unit can be
placed with its back against the wall.
However, ensure that the ventilation
gaps are not covered so that the
appliance operates properly.
The ventilation gaps must also be kept
free of dust.
Installation
^ Remove the cable clip from the back
of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^ Carefully push the appliance into
position with the back against the
wall.
Installation
Ambient room
temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
51
Advertisement
Table of Contents
