Table of Contents
Advertisement
Individual settings can be selected for
each wine conditioning zone.
^ Touch the sensor for the particular
zone of the appliance where you
would like to select the settings.
The selected sensor is highlighted in
yellow. You can now
– set the temperature,
– switch on the DynaCool function.
Please refer to the relevant section for
more information.
If you select another wine conditioning
zone, the settings for the previously
selected zone will remain intact.
Switching on and off
Switching off
^ Touch the On/Off button.
If the appliance does not switch off,
the system lock is activated!
The sensor lights in the control panel
for the 3 temperature zones will go out.
The temperature display will go out and
the mains connection symbol t will
appear.
The interior lighting goes out and
refrigeration is switched off.
Switching off for longer
periods of time
If you do not want to use the appliance
for an extended period of time,
^ switch the appliance off,
^ switch off at the wall and withdraw
the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable,
^ clean the appliance,
^ leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
19
Advertisement
Table of Contents
