Installation; Location; Side-By-Side - Miele KWT 6322 UG Operating And Installation Instructions

Installation

A wine conditioning unit that has not
been installed in its niche can tip up.

Fire risk and danger of damage!
This wine conditioning unit must not
be installed underneath a hob.

Location

This appliance should be installed in a
dry, well-ventilated room.
It should not be installed underneath a
hob, next to a cooker, an oven or a
heater or near a window where it would
be affected by direct sunshine. The
higher the ambient temperature of the
room, the longer the compressor will
run for and the higher the energy con-
sumption.
When installing the wine conditioning
unit, please note:
– The socket must be easily accessible
in an emergency, not concealed be-
hind the appliance.
– The plug and cable must not touch
the back of the wine conditioning unit
as they could be damaged by vibra-
tions from the appliance.
– Do not plug in other appliances be-
hind this wine conditioning unit.

Danger from broken glass!
Danger of injury from broken glass.
If installed at altitudes above 1500 m
there is a risk of the glass in the door
breaking because of changes in air
pressure. Shards of glass can cause
severe injury if not handled with care.
56

Side-by-side

This wine conditioning unit can be in-
stalled side-by-side with another refri-
geration appliance.
A side-by-side installation kit is re-
quired for this. This is available from
Miele or your Miele dealer.
Your dealer will be able to advise you
which combination of models is pos-
sible.
Instructions for fitting appliances side-
by-side are given in the side-by-side
fitting kit instruction manual.