Table of Contents
Advertisement
Display lighting
If you wish to display your bottles of
wine, you can set the interior lighting so
that it remains on when the door is
closed.
Each wine conditioning zone is
equipped with a panel of lights so that
all 3 zones can be illuminated.
LEDs are used to rule out the risk of
damage to wine due to the creation
of heat or the presence of UV light.
Switching the display lighting
on and off
^ Touch the On/Off sensor for the
display lighting so that it is
highlighted in yellow.
The interior lighting is now switched on
in all 3 zones, even when the door is
closed.
To switch off the display lighting:
^ Touch the On/Off sensor for the
display lighting so that it is
highlighted in yellow.
The display lighting is now switched off
when the door is closed.
30
Setting the duration of the display
lighting
The lighting duration for the display
lighting is set at 30 minutes at the
factory.
You can set a lighting duration of 30,
60, 90 minutes to 00 (permanently on).
^ Open the appliance door.
^ Touch and hold the display lighting
sensor for approx. 2 seconds until ^
flashes in the display.
^ Set the lighting duration by using the
sensors for setting the temperature
(X and Y).
The times (in minutes) will flash in the
display.
By touching the respective sensor:
– The lighting duration decreases by
30 minutes.
– The lighting duration increases by 30
minutes.
Advertisement
Table of Contents
