Installation; Location; Side-By-Side - Miele KWT 6321 UG Operating And Installation Instructions

A wine unit that has not been in-
stalled in its niche can tip up.
Keep the appliance door shut until
the wine unit has been built in and
secured in its housing in accordance
with these operating and installation
instructions.

Fire risk and danger of damage!
This wine unit must not be installed
underneath a hob.

Location

This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your
wine unit please bear in mind that it will
use more energy if installed near to a
heater, a cooker or other appliance that
gives off heat. Direct sunlight should
also be avoided.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption is.
When installing the wine unit, please
note:
– The socket must be easily accessible
in an emergency, not concealed be-
hind the appliance.
– The plug and cable must not touch
the back of the wine unit as they
could be damaged by vibrations from
the appliance.
– Do not plug in other appliances be-
hind this wine unit.

Danger from broken glass!
Danger of injury from broken glass.
If installed at altitudes above 1500 m
there is a risk of the glass in the door
breaking because of changes in air
pressure. Shards of glass can cause
severe injury if not handled with care.

Side-by-side

This wine conditioning unit can be in-
stalled side-by-side with another refri-
geration appliance.
A side-by-side installation kit is re-
quired for this. This is available from
Miele or your Miele dealer.
Your dealer will be able to advise you
which combination of models is pos-
sible.
Instructions for fitting appliances side-
by-side are given in the side-by-side
fitting kit instruction manual.

Installation

43