Installation Information; Installation Location; Side-By-Side - Miele KWT 6312 UGS Operating And Installation Instructions

A wine conditioning unit that has not
been installed properly can tip up.

Risk of fire and damage! This
wine conditioning unit must not be
installed underneath a cooktop.

Installation location

This appliance should be installed in a
dry, well-ventilated room.
This appliance should not be installed
where it is exposed to direct sunlight or
directly adjacent to a heat-producing
appliance such as an oven or a radiator.
The higher the ambient temperature of
the room, the longer the compressor
runs, and the more energy the appli-
ance requires to operate. The appliance
should be installed in a dry, well venti-
lated room.
When installing the wine conditioning
unit, please note:
– The electrical socket must be easily
accessible in an emergency, not con-
cealed behind the appliance.
– The plug and cord must not touch
the back of the wine conditioning unit
as they could be damaged by vibra-
tions from the appliance.
– Do not plug in other appliances be-
hind this wine conditioning unit.

Installation information


Danger from broken glass!
Danger of injury due to broken glass!
If installed at altitudes above 4,900 ft
(1,500 m) there is a risk of the glass
in the door breaking because of
changes in air pressure. Shards of
glass can cause severe injury if not
handled with care.

Side-by-side

This wine conditioning unit can be in-
stalled side-by-side with another refrig-
eration appliance.
Tip: Please contact Miele for specific
information about which combinations
will work with your appliance.
59