Changing the door hinging
^ Screw the hinge pin p onto the foot
o from above, paying attention to the
position of the groove in the hinge
^ Tighten the foot o with the spanner
Fitting the appliance door
^ Place the appliance door on the
lower hinge pin p and then align the
door with the hinge at the top.
Caution! The appliance door is
heavy and must be held by a
^ Insert the hinge pin l into the hinge
^ Push the hinge pin l in far enough
so that the groove on the pin is in line
with the hole in the hinge.
^ Undo the screw k from the hinge pin
and screw it into the hole in the
^ Refit the covers j to the glass door.