Gold Sd Separate Supply Air And Extract Air Handling Units, Sizes 04-08 - Swegon GOLD RX Operation And Maintenance Instructions

2.7.4 GOLD SD separate supply air and extract air handling units, sizes 04-08

The individual components are each specified below in a simplified and diagrammatical description.
1
Outdoor air Supply air
The air handling unit is supplied in the variant as shown in Fig.
4a. This variant can be positioned in several different ways as
shown in Fig. 4b.
The air handling unit is shown here as a supply air handling unit.
If the unit is used as an extract air handling unit, the components
marked with an asterisk change function and designation (the
components are named according to whether the function is for
supply air or extract air).
The arrangement of the components
and their designations
1 OUTDOOR AIR*
(In extract air handling units: Extract air)
2 Pressure sensor, supply air filter*, if applicable (Position on
function selector switch = 3) (In extract air handling units:
Pressure sensor, extract air filter)
3 Temperature sensor, outdoor air/air density sensor, supply
air*
(In extract air handling units: Temperature sensor, extract air/
air density sensor, exhaust air)
4 Pressure sensor, supply air fan* (Position on function selector
switch = 2)
(In extract air handling units: Pressure sensor, extract air fan)
8 www.swegon.com
2 3
Fig. 4a
10
5
4
9 8
Fig. 4b
5 Hand-held terminal
6 Temperature sensor, supply air (to be mounted in supply air
duct)
(Not used in extract air handling units)
7 SUPPLY AIR*
(In extract air handling units: Exhaust air)
8 Supply air fan* with motor and motor controller (In extract
air handling units: Extract air fan with motor and motor
controller)
9 Electrical equipm. cubicle with control unit
10 Supply air filter, if applicable*
(In extract air handling units: Extract air filter)
We reserve the right to alter specifications without notice.
GB.GOLDSKE.160901
6
7