Iqnavigator (Hand-Held Terminal) - Swegon GOLD RX Operation And Maintenance Instructions

6.4.25 IQnavigator
(hand-held terminal)
6.4.25.1 Connect to IQlogic
The method of connection between the IQnavigator and IQlogic
can be selected here.
Can be selected as direct (standard cable), DHCP or static IP (re-
quires connection to network), and direct/wireless (requires the
IQnavigator hand-held terminal with WLAN TBLZ-1-71-2 acces-
sory. See separate instructions).
Settings:
Value Setting
range
Connect to IQlogic Direct/DHCP/Static IP/
Direct/Wireless
IQnavigator IP address Optional
IQnavigator Netmask Optional
Pre-selected Optional
IQnavigator gateway
IQlogic IP address Optional
6.4.25.2 Backlight brightness
The hand-held terminal can be set to four different backlight
brightness settings.
Settings:
Value Setting
range
Brightness mode Auto adjust/Low/
Medium/High
6.4.25.3 Acoustics
Button sound effects on the hand-held terminal can be activated
and the volume can be set in fi ve steps.
Settings:
Value Setting
range
Button sound effects On/Off
Volume 1-5
84 www.swegon.com
IQnavigator
Connect to IQlogic
Factory
setting
Direct
Brightness mode
Factory
setting
Auto adjust
Acoustics
Factory
settings
Off
3
GB.GOLDSKE.160901
We reserve the right to alter specifi cations without notice.