Selection Of Language - Swegon GOLD RX Operation And Maintenance Instructions

4.2.1 Selection of language

When the air handling unit starts up for the first time, a lan-
guage selection image is displayed. Select required language and
press OK.
If you want to change to a different language later on – or
if you've selected the wrong language – you can change the
language under Functions in the hand-held terminal. See Section
5.3.7.
4.2.2 Dashboard
4.2.2.1 General
The dashboard is normally displayed if no other image has been
selected.
The touch screen switches to the sleep mode after 45 minutes.
To leave the sleep mode, press on the touchscreen's On/Off
button.
The content in the flow chart changes depending on the selected
type of air handling unit and other functions that affect the
relevant operating conditions.
4.2.2.2 To change the operating mode
You can start and stop the air handling unit or change over to
manual or automatic operation from the dashboard.
The air handling unit should normally be started and
stopped from the hand-held terminal; not by switching
the safety isolating switch on and off.
4.2.2.3 Alarm log
Active alarms, pending alarms and alarm history (50 latest) can
be viewed under Alarm log. See also Section 8.
20 www.swegon.com
Dashboard
Timer, low speed
Stop
Alarm log
Log graph
Shows current
operation status
We reserve the right to alter specifications without notice.
GB.GOLDSKE.160901
Flow chart
Shows number of
current alarms