Unit Power Supply And Start-Up; Main Switch - Swegon ESENSA PX TOP 05 Installation Instructions Manual

4. Unit power supply and start-up

ESENSA units are plug-and-play units.
The general power supply to the unit is located in the electrical
cabinet at the main switch.
Open the electrical cabinet panel, pass the cable through a
cable gland and connect the wires according to the wiring
diagrams below (single-phase and three-phase).
10 www.swegon.com

5. Main switch

To start the machine, use the rotary switch to switch between
ON and OFF modes.
6. Operation and
commissionning manuals
Description
Commissionning
manual
Operation and
maintenance
manual
We reserve the right to alter specifications.
GB.ESENSA.MI.230612
QR code Link
Click here
Click here