Booster Diffusers - Swegon GOLD RX Operation And Maintenance Instructions

6.4.1.9 Booster diffusers

The function for Booster diffusers is used for controlling the air
damper inside the air terminal and can be activated for heat-
ing or cooling. Heating or cooling is modulated depending on
whether the supply air is warmer or colder than the room/extract
air. An indicator is displayed if heating or cooling is active.
The IQlogic module, TBIQ-3-2, accessory is required.
+
Value
Booster diffusers
6.4.1.10 Automatic operation
Density-corrected airflow
The density of the air is different at different temperatures. This
means that a specific volume of air changes at various air den-
sities. The AHU automatically corrects this, so that correct air
volume is always obtained.
The control equipment always displays the corrected airflow.
Pressure balance corrected extract airflow
The extract airflow is corrected by continuously measuring the
pressure balance across the rotary heat exchanger. The extract
airflow is guaranteed with consideration given to the air purging
and leakage air flow.
We reserve the right to alter specifications without notice.
Setting Factory
range setting
On/Off Off
Booster diffusers
GB.GOLDSKE.160901
www.swegon.com 37