Swegon GOLD CX Operation & Maintenance Instructions Manual
Swegon GOLD CX Operation & Maintenance Instructions Manual

Swegon GOLD CX Operation & Maintenance Instructions Manual

Advertisement

Quick Links

OPERATION& MAINTENANCE INSTRUCTIONS
GOLD CX
Generation F

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GOLD CX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Swegon GOLD CX

  • Page 1 OPERATION& MAINTENANCE INSTRUCTIONS GOLD CX Generation F...
  • Page 2: Table Of Contents

    6.4 Volume of Glycol/Water in Coil Heat Exchangers ......17 7. Appendices ............17 7.1 Declaration of Conformity ............17 7.2 Building Materials Declaration .............17 7.3 License ..................17 7.4 Ecodesign data ................18 The document was originally written in Swedish. www.swegon.com We reserve the right to alter specifications.
  • Page 3: Safety Instructions

    Only a qualified electrician or service personnel trained ing off the safety isolating switch before removing the by Swegon shall be permitted to carry out any work on safety guard. the electrical system or wire external functions in the air When the air handling unit is operating, the safety guards handling unit.
  • Page 4: General

    GB.GOLDSKFCX.231015 2. General 2.3 Mechanical Design The GOLD CX units are available in 4 physical sizes and for 8 2.1 Handling the air handling airflow ranges. The outer sheet steel skin is painted in Swegon’s grey metallic unit before commissioning colour (closest RAL colour: 9007).
  • Page 5: The Components Of The Air Handling Units

    26 Tappings for measuring pressure drop across the heat ex- duct) changer. GOLD CX, sizes 100/120: Pipework package including control box are supplied in unmounted condition for floor or wall mounting (accessories). www.swegon.com We reserve the right to alter specifications.
  • Page 6: Basic Circuit Diagram, Pipework Package

    I-time if the heating regulation system is oscillating or operates sluggishly. This requires entering a special code. Contact your Swegon representative. 5. Activate, if needed, manual or auto operation (Dashboard) or lock the speed of the fans (AIRFLOW ADJUSTMENT image).
  • Page 7: Adjusting The Duct System And Air Diffusers

    = flow reading (l/s) When commissioning has been completed, 3 air devices and one branch damper should stand fully open to obtain the lowest possible pressure in the K (Quotient) = system. www.swegon.com We reserve the right to alter specifications.
  • Page 8: Maintenance

    Order new filters from Swegon or your nearest Swegon repre- sentative. Specify the size of the GOLD unit, whether the replace- ment concerns one or two directions of airflow and if you are replacing standard filters and/or possibly a pre-filter.
  • Page 9: Cleaning And Inspection

    If cleaning solvent is used, do not use solvent that will corrode aluminium or copper. Swegon's cleaning agent is recommended. This cleaning agent is sold by Swegon Service. While cleaning, check whether venting is necessary, check the content of glycol in the water and the condition of the coil for leakage.
  • Page 10: Service And Functionality Check

    A Service and Functionality Inspection Report must be performed according to the instructions in Sections 4.1, 4.2 and 4.3. General conditions for warranty liability are given in the delivery provisions applicable to the supply. www.swegon.com We reserve the right to alter specifications.
  • Page 11: Technical Data

    1150 2485 Size Weight, kg 035/040 1038,5 1990 1744 1400 2159 2977 1933-2188 2346-2718 050/060 1038,5 2318 1600 2288 2977 2000 3454-3794 070/080 1273,5 2637 1000 1800 2640 418,5 3447 118,5 2400 www.swegon.com We reserve the right to alter specifications.
  • Page 12 = B + 200 mm. 1048 1000 1048 3186 Size Weight, kg 1122 3340 1070 1200 2400 3440 3314 2500 1720 4294-4772 1122 3340 1070 1200 2400 3440 3314 2500 1720 4494-4990 www.swegon.com We reserve the right to alter specifications.
  • Page 13: Connection To Wiring Terminals

    The max permissible common load on terminals 31-32, outputs for Heat/Cool and damper output (terminals 28-30) is max 32 VA (SD) eller 50 VA (RX/PX/CX). GOLD 100/120: If more than 16 VA is required, use wiring terminals 201 (G) and 202 (G0). Terminals 201-202 can be loaded with a total of max, 48 VA. www.swegon.com We reserve the right to alter specifications.
  • Page 14: Electrical Data

    It is the combination of fan A and B that determines the fuse size. The air handling unit’s rating plate shows the combinations of fan sizes and capacity variants. Electrical connection is 3-phase, 5-wire, 400 V -10/+15%, 50 Hz. GOLD CX, size Fan A, size/capacity variant Fan B, size/capacity variant...
  • Page 15: Fans

    3 x 400 V, 50 Hz Motor shaft power: 3 x 10 kW, motor control system: 3 x 400 V, 50 Hz *) The motor controller limits the output power to the value specified. www.swegon.com We reserve the right to alter specifications.
  • Page 16: Electrical Equipment Cubicle

    The air handling unit’s rating plate shows the combinations of fan sizes and capacity variants. Fan combination Internal fuse protection (A) GOLD CX, Fan A, Fan B, Safety isolating...
  • Page 17: Control Inaccuracy

    CX, size 035/040 227 litres Circulation pump CX, size 050/060 285 litres GOLD CX 035/070, GOLD CX 080 capacity variant 1: CX, size 070/080 354 litres 1 x 3-pole MCB C13A GOLD CX 080, capacity variant 2: Total volume of the coils (excl. pipework package and piping):...
  • Page 18: Ecodesign Data

    66,8 61,9 66,9 9,71 5,30 1176 1560 Aluminium Domel ZKG Static 1,01 66,8 61,9 66,9 9,71 5,30 1176 1560 All documentation is available in digital form and can be downloaded from www.swegon.com www.swegon.com We reserve the right to alter specifications.

Table of Contents