Getting Started; Audience; Using The Control Panel; Display Icons - Avery Dennison Monarch Tabletop Printer 1 System Administrator Manual

G E T T I N G S T A R T E D
The Avery Dennison® Monarch® Tabletop Printer 1 prints on thermal transfer
(ribbon) and thermal direct labels or tags. The printer prints labels continuously (in one
strip) or on-demand (one label at a time). The printer prints on aperture, die cut, black
mark, or continuous (non-indexed) supplies.
A u d i e n c e
This manual is for the System Administrator who configures and updates the printer.
♦
To load supplies, print labels, or how to care for the printer, refer to the Operator's
Handbook.
♦
To create format and batch packets for printing or how to configure the printer online,
refer to the Packet Reference Manual.
Monarch® MPCL™ Toolbox Utilities are available on our Web site. However, they are not
label production software. Call Customer Service for information about label production
software.
U s i n g t h e C o n t r o l P a n e l
The control panel has a four-line LCD display and five buttons. The top three buttons are
function buttons, which vary depending on the task shown above the button. The two
bottom buttons are navigation buttons. Use these buttons to scroll through menus.
The LCD
♦
shows a red background when immediate attention is
required for a jam or error.
♦
shows a green background when the printer is active
(printing or receiving data).
♦
shows a white background when viewing menu prompts,
printer settings, button functions, etc.

Display Icons

The display icons indicate the following:
Icon Description
RFID successful
encode
RFID successful
verification
Battery life
USB drive installed
Icon Description
Wireless mode active
Signal strength
Wired Ethernet mode
active
1
M P C L
R E A D Y
1 9 2 . 0 . 0 . 19 2
F E E D T LA B E L M E N U

Getting Started 1-1