G E T T I N G S T A R T E D
The Avery Dennison® Monarch® Tabletop Printer 1 prints on thermal transfer
(ribbon) and thermal direct labels or tags. The printer prints labels continuously (in one
strip) or on-demand (one label at a time). You can print on aperture, die cut, black mark,
or continuous (non-indexed) supplies.
This chapter explains how to:
♦
connect the power cord and communication cable.
♦
use the printer's control panel.
A power cord and ribbon take-up core (may already be on take-up reel) are included.
Keep the box and packaging material in case the printer ever needs repair.
Note:
Review the Safety Document included with your printer and the Regulatory
information found on our Web site.
A u d i e n c e
This Operator's Handbook is for the person who prints and applies labels.
For advanced printer setup (configuring the printer, changing RFID settings), refer to the
System Administrator's Guide.
P r i n t e r O v e r v i e w
6
5
4
1
Antenna, if installed
2
Cover
3
Liner Tear Edge
4
Exit Cover
5
Navigation Buttons
6
Function Buttons
1
2
3
Getting Started 1-1
1