Table of Contents
Advertisement
Removing and Replacing the Front Panel
Removing the Front Panel:
1. Remove the right side door, and lay the chassis on its left side. See "Removing
the Right Side Door:" on page 4-6.
2. The front panel is secured by 6 pop-in tabs. Press upwards on the three upper tabs
(A) to free them.
3. Gently pull the right side of the front panel toward you in order to free two more
pop-in tabs.
4. Once the right side is free, pivot the front panel toward you until it is totally
released. Be careful not to damage the switches and LEDs board when pulling.
Replacing the Front Panel:
1. Insert the two tabs located on the bottom left and middle of the front panel into
their respective slots. You may have to slightly pivot the front panel to aid the
process.
2. Gently press on the upper and right parts of the front panel until the 4 remaining
tabs are securely inserted into their slots.
3. Replace the right side door. See "Replacing the Right Side Door:" on page 4-6.
TM700 User Guide - Upgrading Your System
Figure 4 - 4 : Pop-in Tabs
4 - 8
Advertisement
Table of Contents
