Juniper EX3200 Hardware Manual page 75

Table 30: Chassis Viewer for XRE200 External Routing Engines (continued)
Field
Interface status
Console port
Management ( me0 ) port
Virtual Chassis port
LCD panel
Temperature
USB port
PIC1 slot
PIC2 slot
Rear View of the XRE200 External Routing Engine
Fan modules
Power supplies
Copyright © 2016, Juniper Networks, Inc.
Chapter 5: Viewing System Information
Description
In the image, the colors listed below denote the interface
status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
For a Virtual Chassis configuration, select the switch to view
the interface status.
The console port is used to connect the switch to a
management host such as a PC or a laptop.
The management port is used to connect the switch to a
management device for out-of-band management. Use this
port for initial switch configuration.
In the image, the colors listed below denote the VCP status:
Green—VCP is up and operational.
Yellow—VCP is up but is nonoperational.
Gray—VCP is down and nonoperational.
Mouse over the interface (port) to view more information.
LCD panel configured for the LEDs on the ports. Mouse over
the icon to view the current character display.
The active slots contain a gray temperature icon. Mouse over
the icon to display temperature information for the slot.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives
purchased from Juniper Networks for your EX Series switch.
You can install a Virtual Chassis module in the PIC1 slot. Mouse
over the Virtual Chassis ports to display the port status details.
You can install a Virtual Chassis module in the PIC2 slot. Mouse
over the Virtual Chassis ports to display the port status details.
Mouse over the fan modules to display the status of the fans
and airflow direction information. For a Virtual Chassis, the
status of the fans of the selected member switch is displayed.
Mouse over the power supply icons to display name, status,
and description information.
53