Juniper EX3200 Hardware Manual page 175

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
The fan tray, uplink module, and transceivers are hot-removable and hot-insertable: You
can remove and replace them without powering off the switch or disrupting switch
functions.
To install a power supply in an EX3200 switch, follow instructions in
Supply in an EX3200 Switch" on page
switch, follow instructions in
page 192.
To install a fan tray in an EX3200 switch, follow instructions in
an EX3200 Switch" on page
instructions in "Removing a Fan Tray from an EX3200 Switch" on page
To install an uplink module in an EX3200 switch, follow instructions in
Uplink Module in an EX3200 Switch" on page
EX3200 switch, follow instructions in
Switch" on page 197.
To install an SFP, SFP+, or XFP transceiver in an EX3200 switch, follow instructions in
"Installing a Transceiver" on page
an EX3200 switch, follow instructions in
Cooling System and Airflow in an EX3200 Switch on page 27
Power Supply in EX3200 Switches on page 29
Uplink Modules in EX3200 Switches on page 15
Pluggable Transceivers Supported on EX3200 Switches on page 75
191. To remove a power supply from an EX3200
"Removing a Power Supply from an EX3200 Switch" on
187. To remove a fan tray from an EX3200 switch, follow
195. To remove an uplink module from an
"Removing an Uplink Module from an EX3200
201. To remove an SFP, SFP+, or XFP transceiver from
"Removing a Transceiver" on page
Chapter 11: Installing the Switch
"Installing a Power
"Installing a Fan Tray in
188.
"Installing an
203.
153