Setting up the Device
Procedure
1. On the rear panel, connect the power cable to the AC power connector
panel of the device
2. Connect the other end of the power cable to the AC power.
3. Use a serial cable to connect a PC to the device's serial port. This connection is required for
local configuration and maintenance.
Important:
Do not connect a screen or a keyboard to the device directly. Define the device's basic
settings via the serial connection only.
Related links
Setting up the Device
February 2016
on page 42).
Figure 23: Rear panel of the device
on page 28
®
Avaya Scopia
Elite 6000 Series MCU Installation Guide
Comments on this document? infodev@avaya.com
(Figure 23: Rear
42