Elite Mcu - Avaya scopia elite 6000 series Installation Manual

Procedure
1. Navigate to the MCU Advanced Commands section by doing the following:
a.
Select the
b. Select Advanced parameters.
c. Locate the H323 SIG port number in the Name column
Port Configuration
2. Select the
3. Enter the port value in the H323 SIG port number field.
4. Select Apply.
5. Select Close.
Related links
Configuring Ports on All Models of the Scopia
Configuring the TCP/UDP/TLS Port for SIP on the Scopia
MCU
About this task
®
The Scopia Elite 6000 Series MCU has designated ports 5060 and 5061 for SIP. You can
configure a different port to use SIP (for example, if port 5060 or 5061 is busy).
Procedure
1. Navigate to the MCU SIP Protocol section by selecting Configuration > Protocols.
2. Locate the Enable SIP protocol section and select More
Configuration
February 2016
icon.
on page 71).
Figure 48: H.323 Signaling Port Configuration
icon in the Review column.
on page 72).
®
Avaya Scopia Elite 6000 Series MCU Installation Guide
Comments on this document? infodev@avaya.com
Configuring Ports on All Models of the Scopia
®

Elite MCU

on page 65
(Figure 49: SIP Port
® Elite MCU
(Figure 48: H.323 Signaling
®
Elite
71