Elite Mcu - Avaya scopia elite 6000 series Installation Manual

Performing Initial Configuration
3. Do one of the following:
• If your SIP server or Registrar is not configured with TLS, enter the port value in the Local
signaling port field.
• If your SIP server or Registrar is configured with TLS, enter the port value in the Local
TLS signaling port field.
Important:
If your SIP server or Registrar is configured with TLS, you can also configure the port
value for TCP/UDP traffic by modifying the Local signaling port field.
4. Select Apply.
Related links
Configuring Ports on All Models of the Scopia
Configuring the TCP Port Range for SIP BFCP on the Scopia

Elite MCU

About this task
®
The Scopia Elite 6000 Series MCU has designated TCP ports 3400-3580 for SIP BFCP.
BFCP is a protocol which coordinates shared videoconference features in SIP calls, often used by
one participant at a time. For example, when sharing content to others in the meeting, one
February 2016
Figure 49: SIP Port Configuration
®
Elite MCU
®
Avaya Scopia Elite 6000 Series MCU Installation Guide
Comments on this document? infodev@avaya.com
on page 65
®
72