Setting The Mcu User Interface Language - Avaya scopia elite 6000 series Installation Manual

®
The Scopia Elite MCU supports the same languages for the Administrator and Conference Control
interfaces, and a different set of languages for the text overlay.
Table 8: Supported Languages in the MCU Interface
Language
English
Chinese (simplified)
French
Japanese
Portuguese
Russian
Spanish
Related links
Setting the MCU Interface Languages

Setting the MCU User Interface Language

About this task
The procedure in this section explains how to set the language of the MCU administrator web
interface and the Conference Control interface. By default, the interface language is set to English.
Important:
To view Chinese or Japanese fonts properly in the Administrator interface, the computer on
which the web browser is running must support the relevant languages. On a Microsoft
Windows operating system, you can set the default language in Control Panel > Regional and
Language Options.
Procedure
1. Access the MCU administrator web interface.
2. Select Configuration
The Setup tab is displayed.
3. Locate the Basics section.
4. Select a language in the Default user interface language list.
February 2016
Administrator Interface
Yes
Yes
Yes
Yes
Yes
Yes
on page 52
.
®
Avaya Scopia Elite 6000 Series MCU Installation Guide
Comments on this document? infodev@avaya.com
Setting the MCU Interface Languages
Conference Control
Interface
Yes
Yes
Yes
Yes
Yes
Yes
Text Overlay on
Conference Video
Yes
Yes
Yes
Yes
53