Performing Initial Configuration
Procedure
1. Access the MCU administrator web interface.
2. Select Configuration
3. Select Conferences.
4. Locate the Services list section.
5. Select the Review button
6. Enter the new prefix number.
7. Select Apply.
Related links
Performing Initial Configuration
Setting the MCU Interface Languages
The MCU supports a number of interface languages which can be set as part of its initial
configuration.
Related links
Performing Initial Configuration
About Supported Languages
Setting the MCU User Interface Language
Setting a Text Overlay Language
About Supported Languages
The MCU has three user interfaces:
• Administrator interface
The web-based interface used by administrators for configuration and maintenance tasks.
• Conference Control interface
The web-based interface used by administrators and operators for conference moderation and
video layout control.
Important:
This interface is not available when the MCU is registered to Avaya Scopia
• Text overlay on conference video
The set of menus that appear in the conference video.
February 2016
.
next to the service.
on page 48
on page 48
on page 52
on page 53
on page 54
®
Avaya Scopia
Elite 6000 Series MCU Installation Guide
Comments on this document? infodev@avaya.com
®
Management.
52