Avaya scopia elite 6000 series Installation Manual page 39

Mounting the Device on to the Rack
Figure 19: Securing rail extensions to the device
c. Repeat these steps on the other side of the device.
2. Slide the device on to the rails until the holes on the device front panel align with the front
post (see Figure 20: Sliding the device onto the rails on page 39).
As you slide, you should hear two clicks; one mid-way and one near the end. These are the
safety latches to stop the device from accidentally sliding out.
Figure 20: Sliding the device onto the rails
®
February 2016 Avaya Scopia Elite 6000 Series MCU Installation Guide 39
Comments on this document? infodev@avaya.com