Installing Patches - HP 830 Series Configuration Manual

Connected to 2.2.2.2.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(2.2.2.2:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Download auto-update.txt from the FTP server.
[ftp] ascii
[ftp] get auto-update.txt
# Download new-config.cfg from the FTP server.
[ftp]get new-config.cfg
# Download soft-version2.bin from the FTP server.
[ftp] binary
[ftp] get soft-version2.bin
[ftp] bye
<AC>
# Change the file extension of auto-update.txt to .bat.
<AC> rename auto-update.txt auto-update.bat
# Use the more command to verify that the file content is correct. (Details not shown.)
# Schedule an automatic software upgrade job for 3 a.m.
<AC> system-view
[AC] job autoupdate
[AC-job-autoupdate] view system-view
[AC-job-autoupdate] time 1 one-off at 03:00 command execute auto-update.bat
3. After the scheduled job is completed, use the display version command to verify the upgrade.
(Details not shown.)

Installing patches

Network requirements
Download a patch file from a TFTP server to fix bugs on the AC in
patch_mpu.bin is saved on the TFTP server. The AC and the TFTP server can reach each other.
Figure 35 Network diagram
Configuration procedure
1. Configure the TFTP server:
# Enable the TFTP server function. (Details not shown.)
# Save the patch file patch_mpu.bin to the working directory on the TFTP server. (Details not
shown.)
95
Figure 35. The patch file