Displaying And Maintaining Cli Login - HP 830 Series Configuration Manual

Poe+ unified wired-wlan switch
Hide thumbs Also See for 830 Series:
Table of Contents

Advertisement

Figure 14 Logging in to an SSH client from the device
Perform the following tasks in user view:
Task
Log in to an IPv4 SSH server.
Log in to an IPv6 SSH server.
To work with the SSH server, you might need to configure the SSH client. For information about
configuring the SSH client, see Security Configuration Guide.

Displaying and maintaining CLI login

Task
Display information about the user
interfaces that are being used.
Display information about all user
interfaces the device supports.
Display user interface information.
Display the configuration of the
device when it serves as a Telnet
client.
Command
ssh2 server
ssh2 ipv6 server
Command
display users [ | { begin | exclude
| include } regular-expression ]
display users all [ | { begin |
exclude | include }
regular-expression ]
display user-interface [ num1 |
{ aux | console | vty } num2 ]
[ summary ] [ | { begin | exclude |
include } regular-expression ]
display telnet client configuration
[ | { begin | exclude | include }
regular-expression ]
40
Remarks
The server argument represents the IPv4 address or
host name of the server.
The server argument represents the IPv6 address or
host name of the server.
Remarks
Available in any view.
Available in any view.
Available in any view.
Support for the aux keyword
depends on the device model. For
more information, see About the
HP 830 Series PoE+ Unified
Wired-WLAN Switch and HP
10500/7500 20G Unified
Wired-WLAN Module Command
References.
Available in any view.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

105007500

Table of Contents