Download  Print this page

Installing Patches - HP 6125G Configuration Manual

Fundamentals configuration guide.
Hide thumbs

Advertisement

Step
1.
Use FTP or TFTP to transfer the
system software image to the
root directory of the master
device's storage media.
2.
Copy the system software
image to the root directory of
each subordinate switch's
storage media.
3.
Specify the file as the startup
software image for each
member switch in user view.
4.
Reboot the entire IRF fabric.

Installing patches

Patches repair software defects without requiring a system reboot.
Patches for this device are released in patch package files.
When installing a patch package file, you must choose to run installed patches or disable running them
after a reboot. If you choose to have installed patches continue to run after a reboot, the installed patches
are set in RUNNING state and remain in this state after a reboot. If not, the installed patches are set in
ACTIVE state and does not take effect at a reboot.
To ensure a successful hotfix operation and normal switch operation after the hotfix operation:
Make sure the patch package file you are installing matches the switch model and software version.
Save the patch package file to the root directory of each member device's Flash memory.
Correctly name the patch package file in the patch_PATCH-FlAG suffix.bin format. The PATCH-FLAG
suffix is predefined and must be the same as the first three characters of the value for the Version
field in the output from the display patch information command. If the patch package file is not
correctly named, the system cannot identify the file.
The default system patch package file name is patch_xxx.bin.
To install and run patches:
Step
1.
Enter system view.
2.
Uninstall the patch package
file.
Command
See "Configuring FTP" or
"Configuring TFTP."
copy fileurl-source fileurl-dest
boot-loader file file-url slot { all |
slot-number } { main | backup }
reboot
Command
system-view
undo patch install
102
Remarks
The image file must be saved in the
root directory for a successful
upgrade.
You can assign different names to
the image files on different member
switches, but must make sure the
image versions are the same.
N/A
N/A
Remarks
N/A
If the system already has a patch
package file, you must uninstall the
file before installing a new patch
package file.
If not, skip this step.

Advertisement

Table of Contents

   Related Manuals for HP 6125G

This manual is also suitable for:

5500 hi series6125 blade switch series

Comments to this Manuals

Symbols: 0
Latest comments: