HP 830 Series Configuration Manual page 94

Figure 29 Impact of patch manipulation commands on patch state
IDLE state
Patches that have not been loaded are in IDLE state. You cannot install or run these patches. As shown
in Figure 30, the patch memory area can load up to eight patches.
The patch memory area supports up to 200 patches.
Figure 30 Patches that are not loaded to the patch memory area
DEACTIVE state
Patches in DEACTIVE state have been loaded to the patch memory area but have not yet run in the system.
For example, suppose that the patch file you are loading has seven patches. After the seven patches
successfully pass the version check and CRC check, they are loaded to the patch memory area and are
in DEACTIVE state. In the patch area, patch states are as shown in
88
Figure 31.