Table of Contents
Advertisement
Installing the switch
WARNING!
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the
chassis, contact your local HP agent for permission. Otherwise, HP shall not be liable for any consequence
caused thereby.
Figure 4 Hardware installation flow
Start
Install the switch to a
19-in rack or
workbench
Ground the switch
Connect the power cord
Verify the installation
Power on the switch
Operating properly?
End
Installing the switch in a 19-inch rack
The 3100-48 v2 switch is available with one pair of mounting brackets, as shown in
Troubleshoot the
No
Power off the switch
Yes
switch
6
Figure
5.
Advertisement
Table of Contents
