Installing A Patch Step By Step - HP 830 Series Configuration Manual

Step
1. Enter system view.
2. Install patches in one step.
If you execute the patch install patch-location command, the directory specified for the patch-location
argument replaces the directory specified with the patch location command after the upgrade is
complete.
If you execute the patch install file patch-package command, the directory specified with the patch
location command does not change.
To uninstall all ACTIVE and RUNNING patches in one step, use the undo patch install command. For
information about the step-by-step patch uninstall method, see

Installing a patch step by step

In contrast to the one-step patch installation method, step-by-step patch installation enables you to control
patch status during the patch installation process.
Step-by-step patch installation task list
Task
Configuring the patch file location
Loading a patch file
Activating patches
Confirming ACTIVE patches
Configuring the patch file location
The patch file location must be the root directory of the storage medium.
To configure the patch file location:
Step
1. Enter system view.
2. Configure the patch file
location.
NOTE:
If you execute the patch install
argument replaces the directory specified with the patch location command after the upgrade is complete.
Command
system-view
patch install { patch-location | file
patch-package }
Remarks
Optional.
To install a patch package, skip this step.
Required.
Required.
Optional.
Command
system-view
patch location patch-location
patch-location
command, the directory specified for the
91
Remarks
N/A
•
patch-location: Specifies the
directory where the patch file is
located.
•
file patch-package: Specifies a
patch package file name.
"Uninstalling a patch step by
Remarks
N/A
By default, the system loads patch
files from the root directory of the
storage medium.
step."
patch-location