Enabling Redisplaying Entered-But-Not-Submitted Commands - HP 830 Series Configuration Manual

Table 3 System-reserved hotkeys
Hotkey
Ctrl+A
Ctrl+B
Ctrl+C
Ctrl+D
Ctrl+E
Ctrl+F
Ctrl+H
Ctrl+K
Ctrl+N
Ctrl+P
Ctrl+R
Ctrl+V
Ctrl+W
Ctrl+X
Ctrl+Y
Ctrl+Z
Ctrl+]
Esc+B
Esc+D
Esc+F
Esc+N
Esc+P
Esc+<
Esc+>

Enabling redisplaying entered-but-not-submitted commands

The redisplay entered-but-not-submitted commands feature enables the system to display what you have
typed (except Yes or No for confirmation) at the CLI when your configuration is interrupted by system
output such as logs. If you have not entered anything, the system does not display the command-line
prompt after the output.
To enable redisplaying entered-but-not-submitted commands:
Step
1. Enter system view.
Function
Moves the cursor to the beginning of a line.
Moves the cursor one character to the left.
Stops the current command.
Deletes the character at the cursor.
Moves the cursor to the end of a line.
Moves the cursor one character to the right.
Deletes the character to the left of the cursor.
Aborts the connection request.
Displays the next command in the command history buffer.
Displays the previous command in the command history buffer.
Redisplays the current line.
Pastes text from the clipboard.
Deletes the word to the left of the cursor.
Deletes all characters to the left of the cursor.
Deletes all characters to the right of the cursor.
Returns to user view.
Terminates an incoming connection or a redirect connection.
Moves the cursor back one word.
Deletes all characters from the cursor to the end of the word.
Moves the cursor forward one word.
Moves the cursor down one line. This hotkey is available before you press Enter.
Moves the cursor up one line. This hotkey is available before you press Enter.
Moves the cursor to the beginning of the clipboard.
Moves the cursor to the ending of the clipboard.
Command
system-view
7
Remarks
N/A