HP 830 Series Configuration Manual page 95

Figure 31 Patch states in the patch memory area after a patch file is loaded
ACTIVE state
Patches in ACTIVE state run temporarily in the system and become DEACTIVE at a reboot. For example,
for the seven patches in
to ACTIVE. Figure 32
The patches that are in ACTIVE state change to the DEACTIVE state at a reboot.
Figure 32 Patches are activated
RUNNING state
After you confirm ACTIVE patches, their states change to RUNNING and persist after a reboot. In
contrast to ACTIVE patches, RUNNING patches continue to take effect after a reboot. For example, if you
confirm the first three patches in
RUNNING state persists after a reboot.
Figure 31, if you activate the first five patches, their states change from DEACTIVE
shows the patch states in the system.
Figure 32, their state changes from ACTIVE to RUNNING, and the
Figure 33 shows the patch states in the system.
89