Installing The Hp 8200 Zl Switches; Included Parts - HP 8200 zl Installation And Getting Started Manual
Hide thumbs
Also See for 8200 zl:
- Reference manual (765 pages) ,
- Management and configuration manual (690 pages) ,
- Configuration manual (195 pages)
Table of Contents
Advertisement
Installing the HP 8200 zl Switches
The 8200 zl switches are easy to install. Each comes with an accessory kit that
includes the brackets for mounting the switch in a standard 19-inch telco rack,
or in an equipment cabinet. The switch has rubber feet already attached so
they can be securely located on a horizontal surface. This chapter tells you
how to install your 8212 zl or 8206 zl switch.
W A R N I N G
To avoid possible personal injury, be careful when lifting the chassis
out of the shipping box. The Switch 8212 zl chassis base system weighs
approximately 50.45 pounds as shipped and 44.75 pounds when empty.
See "Installation Precautions" on
considerations when handling this product.
Included Parts
The following components are shipped with the 8200 zl switches:
■
■
■
■
HP 8212 zl Quick Setup Guide or HP 8206 zl Quick Setup Guide
HP 8200 zl Safety and Regulatory Information
Accessory kit (5070-6865 for the 8206 zl or 5070-2983 for the 8212 zl):
•
two mounting brackets
•
eight 10 mm M4 screws to attach the mounting brackets to the switch
•
eight 5/8-inch number 12-24 screws to attach the switch to a rack
Console cable
page 2-5
for additional safety
2
2-1
Advertisement
Table of Contents
