Dealing With Password Loss When Password Recovery Capability Is Disabled - HP 830 Series Configuration Manual

The device deletes the user privilege level password configuration commands from the main
next-startup configuration file. After the operation is completed, the following message appears:
Clear Super Password Success!
2. When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the device.
The device starts up with the main next-startup configuration file.
3. Configure new passwords for user privilege levels.
In the following example, the password 123456 is configured for user privilege level 3. For
security, the password is always saved in ciphertext to the configuration file, regardless of whether
you specify the simple keyword or cipher keyword for the super password command.
<Sysname> system-view
[Sysname] super password cipher 123456
4. To make the setting take effect after a reboot, save the running configuration to the next-startup
configuration file.
[Sysname] save
Dealing with password loss when password recovery
capability is disabled
1. Reboot the device to access the EXTEND-BOOTWARE menu, and enter 5.
Password recovery capability is disabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 5
2. At the prompt for confirmation, enter Y.
The device deletes its main and backup next-startup configuration files and restores the
factory-default configuration.
The current mode is no password recovery. The configuration files will be
deleted, and the system will start up with factory defaults, Are you sure to
continue?[Y/N]Y
Setting...Done.
3. When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the device.
101
|
|
|
|
|
|
|
|
|
|