Configuring Common Vty User Interface Settings (Optional) - HP 830 Series Configuration Manual

Figure 11 Scheme authentication interface for Telnet login

Configuring common VTY user interface settings (optional)

Before configuring the auto-execute command command and saving the running configuration, make
sure you can access the CLI through a different user interface. You might be unable to access the CLI
through a VTY user interface after configuring the command.
To configure common settings for VTY user interfaces:
Step
1. Enter system view.
2. Enter one or multiple VTY user
interface views.
3. Enable the terminal service.
Enable the user interfaces to
4.
support Telnet, SSH, or both of
them.
5. Define a shortcut key for
terminating tasks.
6. Configure the type of terminal
display.
Command
system-view
user-interface vty first-number
[ last-number ]
shell
protocol inbound { all | ssh |
telnet }
escape-key { default |
character }
terminal type { ansi | vt100 }
35
Remarks
N/A
N/A
Optional.
By default, terminal service is
enabled.
Optional.
By default, both Telnet and SSH
are supported.
The configuration takes effect the
next time you log in.
Optional.
By default, pressing Ctrl+C
terminates a task.
Optional.
By default, the terminal display
type is ANSI.