HP 830 Series Configuration Manual page 47

Task
Release a user interface.
Lock the current user interface.
Send messages to user interfaces.
Command
free user-interface { num1 | { aux |
console | vty } num2 }
lock
send { all | num1 | { aux | console
| vty } num2 }
41
Remarks
Available in user view.
Multiple users can log in to the
device to simultaneously configure
the device. When necessary, you
can execute this command to
release some connections.
You cannot use this command to
release the connection you are
using.
Support for the aux keyword
depends on the device model. For
more information, see About the
HP 830 Series PoE+ Unified
Wired-WLAN Switch and HP
10500/7500 20G Unified
Wired-WLAN Module Command
References.
Available in user view.
By default, the system does not
automatically lock a user interface.
Available in user view.
Support for the aux keyword
depends on the device model. For
more information, see About the
HP 830 Series PoE+ Unified
Wired-WLAN Switch and HP
10500/7500 20G Unified
Wired-WLAN Module Command
References.