Changing The Level Of A Command; Saving The Running Configuration - HP 830 Series Configuration Manual

User interface
authentication
mode
scheme

Changing the level of a command

Every command in a view has a default command level. For most networks, the default command level
scheme is sufficient for security and maintenance requirements. If you want to change the level of a
command, make sure the change does not result in a security risk or maintenance problem.
To change the level of a command:
Step
1. Enter system view.
2. Change the level of a
command in a specific view.

Saving the running configuration

You can use the save command in any view to save all submitted and executed commands to the
configuration file. Commands saved in the configuration file can survive a reboot.
The save command does not save one-time commands, for example, display and reset commands.
User privilege
level switching Information required for the
authentication first authentication mode
mode
Password configured for the
local privilege level on the device with
the super password command.
Password configured for the
local scheme privilege level on the device with
the super password command.
Password for privilege level
switching configured on the AAA
server. The system uses the login
scheme
username as the privilege level
switching username.
Password for privilege level
switching configured on the AAA
scheme local server. The system uses the login
username as the privilege level
switching username.
Command
system-view
command-privilege level level view
view command
19
Information required for the
second authentication mode
N/A
Password for privilege level
switching configured on the
AAA server. The system uses the
login username as the privilege
level switching username.
N/A
Password configured on the
device with the super password
command for the privilege level.
Remarks
N/A
See Table 7 for the default settings.