Table of Contents
Advertisement
Installing the Series 5300xl Switches
The HP Series 5300xl Switches are easily installed. They come with an
accessory kit that includes the brackets for mounting the switch in a standard
19-inch telco rack, in an equipment cabinet, or on a wall. The switches have
rubber feet already attached so they can be securely located on a horizontal
surface.
This chapter shows you how to install your Series 5300xl Switches.
Included Parts
The Series 5300xl Switches have the following components shipped with
them:
HP ProCurve Series 5300xl Switches Installation and Getting Started
Guide (5990-8835), this manual
HP ProCurve Switches Documentation CD ROM
(contains PDF file copies of the documentation for the Series 5300xl
switches and several other HP ProCurve switches)
HP ProCurve Manager for Hubs & Switches - CD ROM and booklet
Customer Support/Warranty booklet
Accessory kit (5065-6521 for the 8-slot Switch 5308xl, Switch 5372xl, and
Switch 5308xl-G48; 5064-9943 for the 4-slot Switch 5304xl, Switch 5348xl,
and Switch 5304xl-G32):
•
two mounting brackets
•
six 10 mm M4 screws to attach the mounting brackets to the switch
•
four 5/8-inch number 12-24 screws to attach the switch to a rack
Console cable
Power cord, one of the following:
Australia/New Zealand
8120-6803
China
8120-8377
Continental Europe
8120-6802
Denmark
8120-6806
Japan
8121-0606
Switzerland
United Kingdom/
Hong Kong/Singapore
United States/Canada/Mexico
2
8120-6807
8120-8709
8121-0605
2-1
Advertisement
Table of Contents
