Preparation For Washing And Rinsing - Meiko DV 80.2 Operating Instructions Manual

Operating instructions DV 80.2 / DV 120.2 / DV 125.2 / DV 200.2 / DV 200.2 PW
Datei:BA_DV80.2_120.2_125.2_200.2_200.2PW_9625769_EN_2002-10.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Key / display Meaning
Short cycle for lightly soiled items
Normal program
Intensive program
Program start
Tank drain
Self-cleaning cycle
Only in case of automatic hood opening:
If the program start button is pressed when the hood is
open and the appliance is ready for operation , the hood
closes and the program starts automatically
Wash temperature
Final rinse temperature
Switching off / Cycle interruption
Table 1; Program key function / items to be washed
For DV 120.2 / DV 125.2 / DV 200.2PW only
The washing power, the final rinse temperature and the cycle time are depending on the
regulated programme number. See also chapter 17.6
8.2

Preparation for washing and rinsing

The preparatory work described below must be carried out before each operation.

Open the hood.(In case of automatic hood opening: Open the hood using the
hood open/close button)

Place the screen and stand pipe in position.

Close the hood.
(In case of automatic hood opening: Close the hood using the hood open/close
button)
ATTENTION! Danger of crushing!
Close the appliance with both hands.
Hood in motion!
Ensure that no part of your body is between the hood and the tank when closing the
hood.
 Switch on the appliance by pressing one of the program pre-selection keys.
W e reserv e the right to change execution and construction!
– Wash program I
– Wash program II
– Wash program III
9625769
Only of
automatic
hood
Open-close
hood key.
16/46