W E Reserv E The Right To Change Execution And Construction - Meiko DV 80.2 Operating Instructions Manual

Operating instructions DV 80.2 / DV 120.2 / DV 125.2 / DV 200.2 / DV 200.2 PW
Datei:BA_DV80.2_120.2_125.2_200.2_200.2PW_9625769_EN_2002-10.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Should the ventilation process be insufficient, repeat the process.
The function "vent detergent pipe" is not existing with machines including detergent
dosing system type ADT ('Advanced Dosing Technology with depression dosing). The
detergent dosing pipe is vented automatically when the first cycle is running, after filling
of the detergent reserve container.
17.3.4 Manually start of regeneration
this display by pressing the "accept" key.
Now the regeneration will be activated and the remaining running time will be indicated.
You can leave this level by pressing the "0" key.The regeneration is interrupted.The
regeneration re-commences when the machine is switched on again.
17.3.5 Configuration level
You can find the list of configuration parameters on this level (parameter numbers 2xx). +
Here you can view these and modify them. You can also call up the status of the inputs
and outputs, or set the outputs for testing.
On the configuration level, you will first see the display below:
This corresponds to the viewing/modifying parameters. (see 17.3.1)
This corresponds to viewing the status of inputs. (see 17.3.7)
This corresponds to viewing and setting the status of outputs. (see 17.3.8)
Press the "I" key to move forwards or the "III" key to move backwards or the "accept" key
to make a selection. You are now at the current level.
You can leave this level by pressing the "0" key.

W e reserv e the right to change execution and construction!

9625769 29/46