W E Reserv E The Right To Change Execution And Construction - Meiko DV 80.2 Operating Instructions Manual

Operating instructions DV 80.2 / DV 120.2 / DV 125.2 / DV 200.2 / DV 200.2 PW
17.3.9 Viewing / modifying dosing technology level
Datei:BA_DV80.2_120.2_125.2_200.2_200.2PW_9625769_EN_2002-10.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
17.3.8 Viewing / modifying output status (according to code entered)
Indication
this display by pressing the "accept" key.
Viewing:
Now, the first output will be shown, with status.
Press the "I" key to move forwards and the "III" key to move backwards, until you reach
the output you require.
Modifying:
Press the "accept" key to confirm the modification of the output, the value will flash. Press
the "I" key to modify the value and press the "accept" key to save it.
The output is now set.
You can leave this level by pressing the "0" key.
Assignment details for the outputs are given on the assignment list for each machine (see
17.5).
By entering code 40000 (read only) or 40044 (read / enter), the user can access the new
4th parameter level summarizing all the dosing technology parameters:
P104, P105, P218, P219, P224, P225, P321, P322, P326, P327.
See 17.4 for list of parameters

W e reserv e the right to change execution and construction!

9625769 31/46