Preparation For Washing And Rinsing - Meiko FV 28G Operating Instructions Manual

Key / display Meaning
Short cycle for lightly soiled items
Normal program
Intensive program
Program start
Tank drain
Self-cleaning cycle
Only in case of automatic hood opening:
If the program start button is pressed when the hood is
open and the appliance is ready for operation , the hood
closes and the program starts automatically
Wash temperature
Final rinse temperature
Switching off / Cycle interruption
Table 1; Program key function / items to be washed
7.2

Preparation for washing and rinsing

The preparatory work described below must be carried out before each operation.
Open the hood. (In case of automatic hood opening: Open the hood using the hood
•
open/close button)
• Place the screen and stand pipe in position.
• Close the hood. (In case of automatic hood opening: Close the hood using the
hood open/close button)
ATTENTION! Danger of crushing!
Close the appliance with both hands.
Hood in motion!
Ensure that no part of your body is between the hood and the tank when closing the
hood.
• Switch on the appliance by pressing one of the program pre-selection keys.
During the filling and heating phase, the light above the pre-selection key will flash.
When the light remains constantly lit, the machine is ready for operation.
The time until the operation readiness is reached depends on the temperature of the
supplied water and the installed boiler, resp. tank heating capacity.
In the case of cold water supply, duration is 40 minutes for: DV 270.2.
– Wash program I
– Wash program II
– Wash program II
15 / 44
Only of auto-
matic hood
Open-close
hood key.
9625762