W E Reserv E The Right To Change Execution And Construction - Meiko DV 80.2 Operating Instructions Manual

Operating instructions DV 80.2 / DV 120.2 / DV 125.2 / DV 200.2 / DV 200.2 PW
17.3.6 Viewing / modifying parameters: (depending on the code
17.3.7 Viewing input status:
Datei:BA_DV80.2_120.2_125.2_200.2_200.2PW_9625769_EN_2002-10.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
entered)
Indication
this display by pressing the "accept" key.
Now, the first parameter will be displayed with a value.
Press the "I" key to move forwards or press the "III" key to move backwards, until the
parameter you require is displayed.
Confirm the parameter to be modified by pressing the "accept" key, the value will flash. +
Press the "I" key to increase the value, the "III" key to decrease the value, and the
"accept" to save the value.
You can leave this level by pressing the "0" key.
See 17.4 for list of parameters
Indication
this display by pressing the "accept" key.
by pressing the "accept" key.
Press the "I" key to move forwards and the "III" key to move backwards, until you reach
the input you require.
Display: input set
Display: input not set
You can leave this level by pressing the "0" key.
Assignment details for the inputs are given on the assignment list for each machine.(see
17.5).

W e reserv e the right to change execution and construction!

.
9625769 30/46