W E Reserv E The Right To Change Execution And Construction - Meiko DV 80.2 Operating Instructions Manual

Operating instructions DV 80.2 / DV 120.2 / DV 125.2 / DV 200.2 / DV 200.2 PW
Par. Configuration
No. options
202 Must be-tank
temperature
203 Pre-rinse time
204 Post-rinse time
205 Operation
indicator
211 Fine adjustment
Post-rinse time
218 Shortage of rinse
aid
219 Shortage of
detergent
224 power supply
mode
Datei:BA_DV80.2_120.2_125.2_200.2_200.2PW_9625769_EN_2002-10.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Use as value
range
Parameters 10 ...80
(50 ..176)
Parameters 0 ...8
Parameters 4 ...30
Parameters 0 ..8
Parameters 0,0..0.9
Parameters 0/1
Parameters 0/1
Parameters 0 ..4

W e reserv e the right to change execution and construction!

Unit Factory
setting
°C/°F 60 Standard for all the rinse programs
on one appliance! Output
dependent on definition.
sec. 0 See pre-rinse process step
sec. 6 6: DV 80.2 / DV 120.2
5: DV 200.2/DV 200.2 PW
7: DV 125.2
Energizing duration for the booster
pump
(running time limited by P306!!)
- 1 Definition of the information which
0 – No information
1 – Filling/Heating, ready for
2 – Filling/Heating, ready for
3 - Filling / Heating
4 - Ready for washing
5 - Washing
6 - Draining
7 - Error
8 – Not status
9 - Reserve
10 - Not status Machine OFF
sec. 0.2 0,2: DV 80.2 /
0,8: DV 200.2 /
0,6: DV 125.2
Figures after the decim al point in
P204
Monitoring
0
Indication
Monitoring
0
Indication
- 1 Definition: Energizing rinse aid
pump:
0 – Rinse pump = 0; no signal
1 – Rinse aid pump; energizing
according to calculated running
time
2 – Rinse aid pump = booster
pump;
energizing as booster pump
3 – Rinse aid pump = wash pump;
energizing as wash pump
4 - Free
Note
is to be switched via the
potential-free contact
washing/washing or pumping
out
washing/washing
machine OFF
and Draining
DV 120.2r
DV 200.2 PW
9625769 34/46